Page 1 of 1

Puxing 888 locked on B9!?

Posted: 01 Nov 2011, 19:36
by caligula

I had my PX888 programed on Berget 9.

Since then I can't reset or reprogram it.

When I try to delete all settings and finally press enter nothing happens!?

Can anyone help me?

Posted: 02 Nov 2011, 06:12
by Lanzo
I had the same problem after B8 so i programmed it myself on B9;-)

What worked for me was as follows:
I connected the Puxxing to my laptop with the programming cable.
Made a new clean "list" with no channels programmed, remember to check preferences and unhook the one saying something about locking channels.... loaded that blank "list" into the Puxxing, disconnected it from the laptop.
Then made a programmed "list" with the frequencies and channels you want and replace that with the previous one on the radio, that worked for me:-)

Me and several friends try to do this without connecting the radio to a laptop via a programming cable but we couldn't make it work without the cable.

Good luck;-)

Posted: 02 Nov 2011, 10:30
by caligula

Have to buy the cable after all then.