Sniping
- Trasher-HU
- Lieutenant
- Posts: 243
- Joined: 03 Jun 2008, 13:53
- Location: Hungary
- Contact:
My Real Sword SVD cycled 580fps springs effortlessly.
But the hopup is not up to the task (long range accuracy is nowhere near to a good bolt-action rifle), better to stay around 500 fps.
But the hopup is not up to the task (long range accuracy is nowhere near to a good bolt-action rifle), better to stay around 500 fps.
B6 - NATO, Fox2, mech QRF
B7 - Orlov mercs, Bravo2, medic
B8 - Poldav 3rd Mtn, mech QRF driver
B9 - Poldav 3rd Mtn. recon, Romeo-2 SL
B10 - Poldav 21st Mech Sappers, SL
B7 - Orlov mercs, Bravo2, medic
B8 - Poldav 3rd Mtn, mech QRF driver
B9 - Poldav 3rd Mtn. recon, Romeo-2 SL
B10 - Poldav 21st Mech Sappers, SL
- Kristov_A.T.F.
- Private
- Posts: 10
- Joined: 22 May 2010, 01:00
- Location: Ireland
- Contact:
- Trasher-HU
- Lieutenant
- Posts: 243
- Joined: 03 Jun 2008, 13:53
- Location: Hungary
- Contact:
The range of adjustment is enough, but the SVD hopup chamber itself is not good for heavy BBs. We tried 6-7 different sleeve/bucking/H-nub setups, incuding inner bbl swap, but the rifle didn't perform well over 50m.Kristov_A.T.F. wrote:do you mean the hopup rubber itself is not up to it or not enough adjustment in the svd .
My bolt-action at the same power level ran rings around it out to 80m w/ .40s. Maybe some custom work on the nozzle and chamber might help.
The RS SVD is a really nice, solidly built rifle, but it's just a sprayer-and-prayer at long range.
B6 - NATO, Fox2, mech QRF
B7 - Orlov mercs, Bravo2, medic
B8 - Poldav 3rd Mtn, mech QRF driver
B9 - Poldav 3rd Mtn. recon, Romeo-2 SL
B10 - Poldav 21st Mech Sappers, SL
B7 - Orlov mercs, Bravo2, medic
B8 - Poldav 3rd Mtn, mech QRF driver
B9 - Poldav 3rd Mtn. recon, Romeo-2 SL
B10 - Poldav 21st Mech Sappers, SL
we just finished upgrading RS SVDKristov_A.T.F. wrote:Hi all
Im playing as sniper this year i plan on using my CA m24 but was wondering if anybody knows the max spring a Real Sword SVD gearbox can take ..
Thanks ..
full die cast aluminum piston(systema for PSG-1 will fit) must be changed
tight bore barrel 6.10 650mm
11.1v 1800mah lipo battery
m140 matrix aeg Spring
custom made aluminum piston head(must be changed) original plastic head gets damaged easy after few shots
at the moment we have 158m/s with 0.20g excel bbs
B10; NAF 9th Reconnaissance & Sniper Unit
B11; GCT Reconnaissance & Sniper Unit
B12; GCT 9tf SF Sniper Unit & Reconnaissance Unit
B13; Cerberus Recon & Sabotage
Tanaka M700 HPA Custom
Systema PTW SPR MOD1
TM MP5K
B11; GCT Reconnaissance & Sniper Unit
B12; GCT 9tf SF Sniper Unit & Reconnaissance Unit
B13; Cerberus Recon & Sabotage
Tanaka M700 HPA Custom
Systema PTW SPR MOD1
TM MP5K
I have S&T SVD, copy of RS SVD. Mecha is 100% of RS one. Do you know if PSG-1 cylinder head fits to this or is it some other type? It is plastic also so I would change that part also. I just need to know what cylinder head to buy.milzins wrote: custom made aluminum piston head(must be changed) original plastic head gets damaged easy after few shots
B5, FFF Turku-2 Squad leader
B6, SRP Snake 1-0 Platoon leader
B7, SRP Bull 1-0 Platoon leader
B8, Civilian, 6mm merc
B9, UN, 6mm Company, 1st PLT leader
B10, Zanzia, Delta plt, Link officer
B12, Yuri Orlov Mercenaries
B14, NAF HQ Intel S2
B15, NAF HQ Intel S2
B16, UPIR HQ QRF
B17, GFM ODA3
B6, SRP Snake 1-0 Platoon leader
B7, SRP Bull 1-0 Platoon leader
B8, Civilian, 6mm merc
B9, UN, 6mm Company, 1st PLT leader
B10, Zanzia, Delta plt, Link officer
B12, Yuri Orlov Mercenaries
B14, NAF HQ Intel S2
B15, NAF HQ Intel S2
B16, UPIR HQ QRF
B17, GFM ODA3
Windi^ wrote:I have S&T SVD, copy of RS SVD. Mecha is 100% of RS one. Do you know if PSG-1 cylinder head fits to this or is it some other type? It is plastic also so I would change that part also. I just need to know what cylinder head to buy.milzins wrote: custom made aluminum piston head(must be changed) original plastic head gets damaged easy after few shots
head of psg-1 will not fit. you will need to make custom one. i have seen somewhere aluminum SVD head for sale made by RS. Check on google. if you will not be able to find msg i still have few custom aluminum heads left
B10; NAF 9th Reconnaissance & Sniper Unit
B11; GCT Reconnaissance & Sniper Unit
B12; GCT 9tf SF Sniper Unit & Reconnaissance Unit
B13; Cerberus Recon & Sabotage
Tanaka M700 HPA Custom
Systema PTW SPR MOD1
TM MP5K
B11; GCT Reconnaissance & Sniper Unit
B12; GCT 9tf SF Sniper Unit & Reconnaissance Unit
B13; Cerberus Recon & Sabotage
Tanaka M700 HPA Custom
Systema PTW SPR MOD1
TM MP5K
I would like to know what gear/webbing you have when you play with your sniper rifle?
B5: Allied
B6: Nato
B7: Nato HQ
B8: Poldavian 3rd QRF
B9: Poldavian 5th
B10: Poldavian 15th Sappers
B11: Blood Raven HQ
B12: Yuri Orlov Mercs QRF
B13: Ikaros Mech
B14: NAF Mech
B15: NAF Mech
B16: NAF Mech
B18: GCT Mech
Swedish & Finnish: living/working in Finland
B6: Nato
B7: Nato HQ
B8: Poldavian 3rd QRF
B9: Poldavian 5th
B10: Poldavian 15th Sappers
B11: Blood Raven HQ
B12: Yuri Orlov Mercs QRF
B13: Ikaros Mech
B14: NAF Mech
B15: NAF Mech
B16: NAF Mech
B18: GCT Mech
Swedish & Finnish: living/working in Finland
The best high-power spring for the RS SVD is a RS M170 - this will give something like 3,6J and is very easy to install.
Only other concern you have to have: (assuming that the box is without damage to start with)
You need a GOOD battery - 11,1V LiPo "As big as possible (I use 2x7,4V 1300mAh 25C in eerie (= 14,8V) in mine, but have also good experience with a 11,1V 1560mAh 20C)
I will also suggest a Mosfet - I use a simple SRC mosfet, but this does the trick.
The stock motor can be used, but a High Tourque like the SRC Maganatar is better (and draws less current)
RS recommends that you also exchange the piston head with their CNC alu, but the stock one is also fine.
Only other concern you have to have: (assuming that the box is without damage to start with)
You need a GOOD battery - 11,1V LiPo "As big as possible (I use 2x7,4V 1300mAh 25C in eerie (= 14,8V) in mine, but have also good experience with a 11,1V 1560mAh 20C)
I will also suggest a Mosfet - I use a simple SRC mosfet, but this does the trick.
The stock motor can be used, but a High Tourque like the SRC Maganatar is better (and draws less current)
RS recommends that you also exchange the piston head with their CNC alu, but the stock one is also fine.